Quick answer: On October 29, 2026, the engine issued a sell limit on EUR/AUD based on H4 bearish market structure and a 50% retracement into the premium zone. The trade was filled at 1.58830 but failed to reach TP1. Price drifted within a range before ultimately hitting the 1.59960 stop-loss on November 1, resulting in a full 1R loss of 113 pips.

EUR/AUD SELL H1 chart with entry, stop and targets

*Real H1 chart: blue = entry, red = stop, green = TP1-TP3. Times in UTC.*

The setup: why the engine took it

The trade was triggered by H4 bearish market structure, identified by lower highs and lower lows and a clear break of structure. The entry was placed at the 50% equilibrium of the H4 dealing range to capture a move in the premium zone. Additional factors included H1 price action residing in the premium half of the last 14 candles and an unfilled H1 fair value gap. Entry was positioned above the 1.58176 TWAP to sell into strength. The setup was labeled high-entropy, indicating specific statistical tape characteristics. Note: This signal utilized the earlier rule-set involving H4 EMA trends and RSI checks, which has since been superseded by the current five-check SMC methodology established on 15 Oct 2026.

The trade plan

| Item | Value |

| :--- | :--- |

| Entry | 1.58830 |

| Stop loss | 1.59960 |

| TP1 | 1.57699 |

| TP2 | 1.56568 |

| TP3 | 1.55438 |

| Risk (pips) | 113 |

| Order type | LIMIT |

| Session | London |

What happened

| Time | Event |

| :--- | :--- |

| 2026-10-29 11:00 UTC | Signal issued |

| 2026-10-29 14:00 UTC | Trade filled at 1.58830 |

| 2026-11-01 02:00 UTC | Stop-loss triggered at 1.59960 |

| 2026-11-02 12:00 UTC | Trade closed |

The trade was filled during the London session. Following the entry, price action moved against the short bias, briefly offering a minor move of 0.84R in favor before reversing. The trade remained open for 94 hours before the stop was touched.

Result

The trade resulted in a -1R loss. Because price failed to reach TP1 at any point, no position management (taking partial profits or moving the stop to break-even) was possible. The total loss amounted to 113 pips.

What this trade teaches

First, price reached a best move of 0.84R in our favor, which was insufficient to reach the 1R TP1 target. This highlights the importance of hitting initial targets before expecting trade management to de-risk the position. Second, the trade duration of 94 hours without reaching a target suggests that momentum for the bearish H4 structure had dissipated. Third, the stop-loss held as the exit point exactly as planned, preventing a larger drawdown during a period of market volatility.

Frequently asked questions

Why was the trade held for 94 hours?

The engine methodology includes a time-exit rule where positions are closed at market if they are still open after 120 hours. This trade was held because it remained within the defined risk parameters for the majority of the duration, only reaching the stop-loss at the 94-hour mark, just before the scheduled time-based liquidation.

Could the stop-loss have been tightened?

While a tighter stop might have reduced the initial risk in pips, it would have been hit prematurely given the price movement during the period. The stop was set beyond the leg high to ensure the structural thesis remained valid; reducing it would have invalidated the engine's requirement for a safe technical placement.

Does a 0.84R move indicate a signal failure?

Not necessarily. A move of 0.84R shows the trade was directionally correct for a short period. In trading, the difference between a successful trade and a stopped-out position can be a small percentage of the total movement. Here, the bearish momentum was simply too weak to sustain the move to the first take-profit objective.

Every signal, win or lose, is on the record: weekly results · how the signals are built · today's signals · get free signals.

*Educational only, not financial advice. Past results do not guarantee future results.*

Related reading

Blog | Tebotechsignals
Skip to main content
EUR/AUD Sell Case Study (29 Oct 2026): H4 Structure Break, SL -1R
case studies
November 10, 2026

TebotechSignals Research Team

Institutional FX Analysts · ICT Smart Money Concepts Specialists

EUR/AUD Sell Case Study (29 Oct 2026): H4 Structure Break, SL -1R

A detailed review of a failed EUR/AUD sell setup where price momentum faded before hitting targets, resulting in a full -1R stop-loss hit.

#EURAUD
#Forex
#SMC
#Loss
#CaseStudy

📘 Reading Price Like the Big Players

Liquidity, order blocks and market structure — explained in plain English. Just $10.00.

Get It

📘 Trading Without the Drama

Fixing risk management, discipline and misinformation — explained in plain English. Just $10.00.

Get It
✨
Sponsored · Keller, TX

Turn Your Profits Into Memories 🎉

Quick answer: On October 29, 2026, the engine issued a sell limit on EUR/AUD based on H4 bearish market structure and a 50% retracement into the premium zone. The trade was filled at 1.58830 but failed to reach TP1. Price drifted within a range before ultimately hitting the 1.59960 stop-loss on November 1, resulting in a full 1R loss of 113 pips.

EUR/AUD SELL H1 chart with entry, stop and targets

Real H1 chart: blue = entry, red = stop, green = TP1-TP3. Times in UTC.

The setup: why the engine took it

The trade was triggered by H4 bearish market structure, identified by lower highs and lower lows and a clear break of structure. The entry was placed at the 50% equilibrium of the H4 dealing range to capture a move in the premium zone. Additional factors included H1 price action residing in the premium half of the last 14 candles and an unfilled H1 fair value gap. Entry was positioned above the 1.58176 TWAP to sell into strength. The setup was labeled high-entropy, indicating specific statistical tape characteristics. Note: This signal utilized the earlier rule-set involving H4 EMA trends and RSI checks, which has since been superseded by the current five-check SMC methodology established on 15 Oct 2026.

The trade plan

ItemValue
Entry1.58830
Stop loss1.59960
TP11.57699
TP21.56568
TP31.55438
Risk (pips)113
Order typeLIMIT
SessionLondon

What happened

TimeEvent
2026-10-29 11:00 UTCSignal issued
2026-10-29 14:00 UTCTrade filled at 1.58830
2026-11-01 02:00 UTCStop-loss triggered at 1.59960
2026-11-02 12:00 UTCTrade closed

The trade was filled during the London session. Following the entry, price action moved against the short bias, briefly offering a minor move of 0.84R in favor before reversing. The trade remained open for 94 hours before the stop was touched.

Result

The trade resulted in a -1R loss. Because price failed to reach TP1 at any point, no position management (taking partial profits or moving the stop to break-even) was possible. The total loss amounted to 113 pips.

What this trade teaches

First, price reached a best move of 0.84R in our favor, which was insufficient to reach the 1R TP1 target. This highlights the importance of hitting initial targets before expecting trade management to de-risk the position. Second, the trade duration of 94 hours without reaching a target suggests that momentum for the bearish H4 structure had dissipated. Third, the stop-loss held as the exit point exactly as planned, preventing a larger drawdown during a period of market volatility.

Frequently asked questions

Why was the trade held for 94 hours?

The engine methodology includes a time-exit rule where positions are closed at market if they are still open after 120 hours. This trade was held because it remained within the defined risk parameters for the majority of the duration, only reaching the stop-loss at the 94-hour mark, just before the scheduled time-based liquidation.

Could the stop-loss have been tightened?

While a tighter stop might have reduced the initial risk in pips, it would have been hit prematurely given the price movement during the period. The stop was set beyond the leg high to ensure the structural thesis remained valid; reducing it would have invalidated the engine's requirement for a safe technical placement.

Does a 0.84R move indicate a signal failure?

Not necessarily. A move of 0.84R shows the trade was directionally correct for a short period. In trading, the difference between a successful trade and a stopped-out position can be a small percentage of the total movement. Here, the bearish momentum was simply too weak to sustain the move to the first take-profit objective.

Every signal, win or lose, is on the record: weekly results · how the signals are built · today's signals · get free signals.

Educational only, not financial advice. Past results do not guarantee future results.

Share with a trader who needs this

✨
Sponsored · Keller, TX

Turn Your Profits Into Memories 🎉

📲 Get Free Daily Signals on WhatsApp

Follow our free channel for daily market briefs, ICT signals, and SMC education — delivered straight to your WhatsApp.

Join Free →

Disclaimer: This site is an educational platform. All content — including courses, articles, and any market commentary — is for educational and informational purposes only and does not constitute financial, investment, or professional advice, a recommendation, or a solicitation to trade. It is general in nature and does not take into account your individual financial situation, objectives, or needs. All trading and investing involve risk of loss; past performance is not indicative of future results. Always conduct your own research and consult a licensed professional before making any financial decisions. Client and testimonial experiences may not be typical — individual results will vary. Full fee structure is disclosed on our Pricing page.

We use cookies for essential site functionality and, with your consent, for analytics and advertising (Google Analytics, Facebook, Bing) to understand traffic and improve TebotechSignals. See our Privacy Policy for details.